Gibson GNGB60JGUC Manual de usuario descargar pdf (Pagina 9)

Turning the burner off

To put the flame out, turn the knob to the off

position .

WARNING!

Always turn the flame down or

switch it off before you remove the

pans from the burner.

Hob - Hints and tips

WARNING!

Refer to Safety chapters.

Cookware

WARNING!

Do not put the same pan on two

burners.

WARNING!

Do not put unstable or damaged

pots on the burner to prevent spills

and injuries.

CAUTION!

Make sure that pot handles are not

above the front edge of the

cooktop.

CAUTION!

Make sure that the pots are placed

centrally on the burner in order to

get the maximum stability and a

lower gas consumption.

Diameters of cookware

WARNING!

Use cookware with diameters

applicable to the size of burners.

Burner Diameter of cook‐

ware (mm)

Rapid 160 - 260

Semi-rapid 140 - 240

Auxiliary 120 - 180

Energy saving

• If it is possible, always put the lids on the

cookware.

• When the liquid starts to boil, turn down

the flame to barely simmer the liquid.

Hob - Care and cleaning

WARNING!

Refer to Safety chapters.

General information

• Clean the hob after each use.

• Always use cookware with a clean base.

• Scratches or dark stains on the surface

have no effect on how the hob operates.

• Use a special cleaner suitable for the

surface of the hob.

• Wash stainless steel parts with water, and

then dry them with a soft cloth.

Cleaning the hob

• Remove immediately: melted plastic,

plastic foil, sugar and food with sugar,

otherwise, the dirt can cause damage to

the hob. Take care to avoid burns.

• Remove when the hob is sufficiently

cool: limescale rings, water rings, fat

stains, shiny metallic discoloration. Clean

the hob with a moist cloth and a non-

abrasive detergent. After cleaning, wipe

the hob dry with a soft cloth.

• To clean the enamelled parts, caps and

crowns, wash them with warm soapy water

and dry them carefully before you put them

back on.

Cleaning the spark plug

This feature is obtained through a ceramic

ignition candle with a metal electrode. Keep

these components well clean to prevent

difficult lighting and check that the burner

crown holes are not obstructed.

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comentarios a estos manuales

Sin comentarios