Gibson GCG91426XA Manual de usuario descargar pdf (Pagina 19)

Do not lose the screws.

1. Open the door fully and hold the two door

hinges.

2. Lift and turn the levers on the two hinges.

3. Close the oven door to the first opening

position (halfway). Then pull forward and

remove the door from its seat.

4. Put the door on a soft cloth on a stable

surface.

5. Use a screwdriver to remove 2 screws

from bottom edge of door.

1

1

6. Use a spatula made of wood or plastic or

equivalent to open the inner door. Hold

the outer door, and push the inner door

against the top edge of the door. Lift the

inner door.

2

2

3

7. Clean the oven door with water and soap.

Clean inner side of the door. Dry the oven

door carefully.

When the cleaning is completed, install the

glass panels and the oven door. To install the

oven door, do the above steps in the opposite

sequence.

4

4

5

5

6

Replacing the lamp

Put a cloth on the bottom of the interior of the

appliance. It prevents damage to the lamp

glass cover and the cavity.

WARNING!

Danger of electrocution!

Disconnect the fuse before you

replace the lamp.

The lamp and the lamp glass cover

can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box or

deactivate the circuit breaker.

The back lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300 °C

heat-resistant lamp.

4. Install the glass cover.

19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Comentarios a estos manuales

Sin comentarios